User's Manual

ManualsBrandsARESON Technology ManualsComputers & AccessoriesWireless Mouse

Table Of Contents

1. Insert the batteries

a. Take out the receiver on the bottom case first, press the battery cover release button on

the bottom of the mouse which is under the receiver.

b. Remove the battery compartment cover on the top case of the mouse.

c. Fit in the batteries accordingly to the diagram indicated in the battery cabinet.

d. Close the battery compartments cover properly.

e. Make sure the Power on-off swich on the bottom of the mouse is ON.

f. The Low Power LED in the wheel bar will blink 3 seconds if the mouse power is on.

Wheel button

Dpi button

Battery cover

ID reset button

LED indicator

Receiver

Mouse

Receiver

Introduction

Congratulations on your purchase of the most innovative wireless mini mouse. With an

incredible sensitivity to surface details and high tracking speed than other mice, the mouse

can track reliably even on tricky polished or wood-grain surfaces. It offers even more

advance that will make you more productive and more comfortable.

A. Hardware Installation

2.4GHz (distance 6~8m), 16 Channels/4096 ID

Using state-of-art laser technology. High tracking speed and sensitivity.

4-way scrolling.

Storable mini receiver

One year battery life. (*Optional for specific laser long-life models)

Auto-Link, Plug and Play! No need to set the channel ID.

Power on/off switch

Data report rate : 125 Report/Sec.

800/1600 dpi switchable button.

2*AA Alkaline batteries included.

Power on/off

switch

This product complies with IEC 60825-1, Class I laser product.

Your product complies with FCC and CE rules.

Safety Notice

Please DO NOT direct the

laser beam at anyone's eyes.

Features

A wrong battery placement

may cause batteries overheat.

Battery compartment cover

2 * AA batteries

Battery cover

release button

Low power Led/

Power on indicator/

Dpi switching indicator

2. Connect the receiver

a. Turn on your PC.

b. Connect the receiver to USB port on PC

USB port

The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any

button of the mouse" is compulsory to wake it up.

Power on/off:

There is a Power on/off switch designed to save the batteries power while non-usage of a longer period.

Users can push DPI button to change the resolution. The low power LED will be flashed when dpi has been

successfully swithced.

1 2

Summary of content (3 pages)

PAGE 1
Introduction A. Hardware Installation Congratulations on your purchase of the most innovative wireless mini mouse. With an incredible sensitivity to surface details and high tracking speed than other mice, the mouse can track reliably even on tricky polished or wood-grain surfaces. It offers even more advance that will make you more productive and more comfortable. 1. Insert the batteries Safety Notice This product complies with IEC 60825-1, Class I laser product.
PAGE 2
3. Communication : The mouse & the receiver Note The 4-Way scrolling function is only effective under successful installation of the original mouse driver. The driver is an optional item included in the package or it can be downloaded from the website of your local brand vendor. The 2.4Ghz RF mouse features a dual-way transmission technology which enables the mouse and the receiver auto-communication.
PAGE 3
FCC statement This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.