User Manual

PC
Introduction
Congratulations on your purchase of the most innovative bluetooth mouse. With an
incredible sensitivity to surface details and high tracking speed than other mice, the mouse
can track reliably even on tricky polished or wood-grain surfaces. It offers even more
advance that will make you more productive and more comfortable.
2.4GHz Bluetooth RF (distance : 10m, in open site)
Using state-of-art technology. High tracking speed and sensitivity.
79 Channels
Power on/off switch
2*AAA Alkaline batteries included
800/1600 dpi switchable button.
Features
This product complies with IEC 60825-1, Class I laser product. (for Laser mouse
models only.)
The product complies with FCC and CE rules.
Safety Notice
This Product doesn’t include Bluetooth dongle.
The mouse easily connects to notebooks built in Bluetooth technology.
The mouse also can be connected to Bluetooth dongle through your Bluetooth
dongle driver, it is not guaranteed 100% compatile.
Note
1. Insert the batteries
a. Remove the battery compartment cover on the bottom case of the mouse
b. Fit in the batteries accordingly to the diagram indicated in the battery cabinet.
c. Close the battery compartments cover properly.
d. Make sure the Power on-off swich on the bottom of the mouse is ON.
e. The Low Power LED in the scroll wheel will blink 3 seconds if the mouse power is on.
Hardware Installation
The unit offers a strong power saving management. Once the mouse accesses the sleeping mode, " to click any
button of the mouse" is compulsory to wake it up.
Power on/off:
Power on/off switch is designed to save the batteries power while non-usage of a longer period.
2. Bluetooth Pairing
a. Turn on your PC .
b. Insert battery properly ( please refer to ”Hardware Installation” & ”Insert the batteries” )
make sure that mouse is in power on status. Push ID Button to enter connecting status,
and low power LED will be flashing slowly
Please DO NOT direct the
laser beam at anyone's eyes.
Wheel button
Dpi button
ID reset button
Mouse
Power on/off switch
Battery cover
Low power indicator
+
-
A wrong battery placement
may cause batteries overheat.
Battery compartment cover
2 * AAA batteries
ID reset button
Power on/off switch
The red LED on the scroll wheel of the mouse is a low batteries power indicator. It indicates that batteries inside
the mouse need to be replaced.
Make sure that you are not working the mouse on glossy or reflective surfaces.
Internet Forward &
Backward button