User Manual

ManualsBrandsARESON Technology ManualsComputers & AccessoriesWireless Bluetooth Mouse

Table Of Contents

User's Guide

Mini Bluetooth

Laser Mouse L168BT

Battery use reminders

1. Remove worn-out batteries from equipment immediately and dispose of promptly.

2. Keep all batteries (used or new) out of the reach of children.

3. To have the batteries with a regular check and replace new batteries if not used for a long time.

4. Never dispose of batteries in fire, as they could explode.

5. Always replace all the batteries at the same time. Mixing old and new batteries or mining types (such

as alkaline with zinc carbon) will reduce overall performance and could cause leakage or rupture.

6. Do not mix different types of batteries (e.g. Ni-MH, NiCd, alkaline, and etc) in the mouse.

7. Remove batteries from the electrical device if the device is not going to be used for a long time.

8. If the performance of the batteries decreases substantially, it is time to replace the batteries.

Summary of content (4 pages)

PAGE 1
Battery use reminders 1. Remove worn-out batteries from equipment immediately and dispose of promptly. 2. Keep all batteries (used or new) out of the reach of children. 3. To have the batteries with a regular check and replace new batteries if not used for a long time. 4. Never dispose of batteries in fire, as they could explode. 5. Always replace all the batteries at the same time.
PAGE 2
Introduction A. Hardware Installation Congratulations on your purchase of the most innovative bluetooth mini mouse. With an incredible sensitivity to surface details and high tracking speed than other mice, the mouse can track reliably even on tricky polished or wood-grain surfaces. It offers even more advance that will make you more productive and more comfortable. 1. Insert the batteries Safety Notice This product complies with IEC 60825-1, Class I laser product. (for Laser mouse models only.
PAGE 3
c. Click “Bluetooth icon” to open Bluetooth device in control panel or toolbar g. please tick “ Don’t use a passkey ” and click “ Next ” d..Click “ add “ h.Now Bluetooth device is in connecting status. e. Please tick “ My device is set up and ready to found ” and click “ Next ” i. System will show installment finished in dialogue box, then click “ finish”. f.
PAGE 4
Federal Communications Commission (FCC) Statement You are cautioned that changes or modifications not expressly approved by the part responsible for compliance could void the user’s authority to operate the equipment. NOTE: This device has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.