User's Guide

ScanBrick® W User Manual
Doc: ARE-016631
Issue: 7.2
Date: Sept 2022
14
IP
192.168.1.40
Network Mask
255.255.255.0
Gateway
192.168.1.1
Recovery State
This state is used to guarantee the system to be always reachable at any stage of its life cycle. The
Maintenance task is activated in this state and only maintenance commands (see Section 4.3) can
be sent to the system while it is in this state.
After 30 seconds, in absence of a stable host connection, the system activates the user selected
Ethernet interface (see Section 4.3) and goes to the Operational state.
Operational state
In this state both the Radar task and the on-board processing task are activated. The system is now
ready to receive/send commands/data from/to a connected host (see Section 4.2).
Notice that in this state the system is still able to receive maintenance commands.
NOTE:
• Host/Server software libraries for communication are closed and not accessible to any user.
• In case of need of a firmware update, the new image is crypted and protected against
unauthorized individuals.