User's Guide

ScanBrick® W User Manual
Doc: ARE-016631
Issue: 7.2
Date: Sept 2022
15
4. Level Metering SW Application
Level Metering SW is released as a dynamic-link library, LevelMeterCLI.dll, developed in C++/CLI.
The interface of such a library is detailed in ARE-011967.
In order to test this library, LeverMeterGUI application (C# developed) has been released. Here
below a guide to this application is provided.
4.1. Installation
Requirements
The recommended minimum system requirements for a proper use of LevelMeterGUI software are:
- Intel® Core™ i5 5300U vPro™ Processor
- Microsoft Windows 7/ Windows 10
- Intel® HD 5500 graphics
- 8GB RAM
In order to connect to ScanBrick® W system for a new data acquiring session, a Network Ethernet
cards (100Mbit/s) is necessary.
Procedure
To install LevelMeterGUI, it is first important to have no previous version of the software installed. If
this is the case, make sure to remove it from the computer before installing the current version.
Open Explorer and go into the LevelMeterGUI setup folder. The content of the folder should be as
shown in Fig.5.