User's Guide

ScanBrick® W User Manual

Doc: ARE-016631

Issue: 7.2

Date: Sept 2022

Fig.7 LevelMeterGUI Main Window

Device Selection

First thing to do to have the application working is to select a device using the panel in Fig.8.

By clicking Get All button, a list of all the radar system on the network will be provided in the drop-

down menu labeled as Device IP / MAC. For each device, both the IP and the MAC addresses will

be reported. Click on one of the devices in the menu to fill the text boxes IP Address and MAC

Address (which can be also manually edited).

NOTE: if a device in the network is already connected to another host application instance (i.e. it is

in a busy state), its address will appear red colored in the Device IP / MAC drop-down menu and it

will be impossible to select it. Since the radar can be connected to one and only one application at

a time, it is impossible to connect to a device already busy.

Once the addresses text boxes are filled, two alternative choices are available:

- Press Select IP button: in this case the Level Metering application will always work with the

radar device owner of this IP address. If the connection with the device is lost during a working

session (for example due to a network brake down), the Level Metering application will retry