User's Guide

ScanBrick® W User Manual
Doc: ARE-016631
Issue: 7.2
Date: Sept 2022
27
Fig.17 LeverMeterGUI Maintenance Window
System Connection
First thing to do to start a system maintenance session, is to connect the device using the Connect
button in Fig.18. Note that in this case, just a single synchronous attempt of connection with the
radar is performed. If this attempt fails, it is necessary to retry by clicking the button again. Press
Disconnect button to disconnect the system.
The result of the connection/disconnection operations is displayed in the Connection State box. All
the other operations in this maintenance windows can be successfully performed only if the system
is connected.