Instructions Circuit Diagram

- 3 -
1. PRODUCT DESCRIPTION ROBOT ARM
This big metal Robot Arm is ideally suited for school and educational projects
to learn the basics of electronics, mechanics and programming. The ROBOT
ARM is controlled by a powerful ATMEGA64 microcontroller that is program-
mable via Open Source Tools in C. The user can upload his own programs
simply and easily via the supplied USB interface and the Uploader software.
The I/O in- and outputs together with the exible I2C bus system allow the
addition of extra modules thus enabling the robot to react to its environment.
Contents of the package:
- Complete Robot Arm construction set (mechanics and electronics)
- USB interface with lead
- CD-ROM containing all required software and manuals
1.2. Specications:
- ATMEGA64 processor
- Various available I/O In/Outputs
- I2C Bus
- 6 maxi-servos
- 100% metal
- Armlenght: 390 mm
- Height: 460 mm
- Base diameter: 210 mm
- Power supply: 6-12V
* The right of return does not apply after opening the plastic bags containing parts and components.
* Read the manual thoroughly prior to assembling the unit.
* Be careful when handling tools.
* Do not assemble the robot in presence of small children. They can get hurt with the tools
or swallow small components and parts.
* Check the correct polarity of the batteries.
* Make sure that batteries and holder remain always dry. If the ROBOT ARM gets wet, remove the
batteries and dry all parts as thoroughly as possible.
* Remove the batteries if the ROBOT ARM will not be used for more than one week.
Warnings