User manual

APPENDIX

TIPS

Checking the drivers

- Check (at: Start > Conguration window > Devices and Printers) the

execution of RF-USB. Re-install the driver. Wait to connect the device

until the installation process commands you to do so!

- Check the correct installation of the driver and the PC-connection.

Check the entry ‘USB@x’ at the “Synchronisation” window of the

Multilogger Software and the accompanying rmware version of the

module. (Multilogger Software Menu – display section: Tools’ section)

Checking the sensors

Insert batteries into the sensors. The sensors automatically will register

themselves to the software. Check the “Sensorlist” window at the

Multilogger Software (Multilogger Software Menu – display section: Tools’

section). The sensors’ list displays three columns:

Sensor name, Date and Time stamp for the most recent measurement

data and the referenced temperature value.

User manual for the Multilogger-Software

All user information for the Multilogger-Software may be found in the soft-

ware’s help-section.

Unknown sensors

You can remove the unknown sensors with the tool “Erase Data Flash

Tool”

RESET BS-510

Remove power and inside battery for about 20 sconds

WE ADVICE YOU TO REGULARLY UPDATE THE MULTILOGGER

SOFTWARE VISIT: WWW.AREXX.COM