Specifications

How to remove the memory's contents at the BS-510 or BS-1000
(the yellow LED is illuminated)
Visit the BS-1000's 'maintenance' page at the menu section 'administrative
pages'. In this section you will find a button to reset the flash memory. This
command also checks the functionality of the flash memory.
How can I check the functionality of the internal memory?
We advise to use the flash test at our website. You may also apply the test
at the BS-1000's 'maintenance' page (see the previous FAQ).
For what purposes may I use the Messenger?
The messenger software enables you to send messages by email and/or http,
in which the most recent sensor data are included.
Optionally you may program transmission for special conditions, e.g.: the
temperature is below zero degrees. The http-messages may also be used to
update a webserver with recent sensor data in real-time. The PC-version of
the messenger allows you to execute a cmd shell script, whereas the BS-
1000/TL-09 version is capable of triggering a buzzer.
For further information see: the Manual_BS1000_messenger.pdf
What are RULES?
The messenger software has been equipped with so-called rules to control
the triggering of events by incoming sensor data. For a logger, a number of
rules may be defined. A rule is a description containing a conditional
statement and a definition for action. If the given conditions have been
fulfilled, the defined action (for example sending an email) the will be
triggered.
How can I to use rules?
Rules may be defined in the logger software, or by rule-editor, for the BS-
1000/TL-09. The rule editor defines a rule file, containing 1 or several rules.
You may upload the rule file to the base station. The BS-510 however will
only work with a pc software.