Specifications

How do I set up the system to display data at several laptops/PC's?
Use the Sync file config tool in the tool menu of the logger software. The
most simple strategy is to link a BS-1000 to the PC (by a network link) and
to expand the system from this core system. Connecting the BS-1000 is
simplified by using the BS-1000 wizard, in which the logger software is
configured - to be followed by an upload of the rule file to the BS-1000.
The sync file config tool generates an xml-file, describing the data-sources
for the logger-software and a description of possible addressees for the
sensor data, to which the logger-software is to send the data.
For further information see the Synchronization_Configuration_Tool.pdf
How do I receive my PC BS-500 data at my laptop?
To do so please apply the synchronisation functionality of the logger software.
Open the sync file config tool. At the PC name enter a network's name (in
this case the laptop's name) as the target to which the PC-logger is going to
send data. At the laptop we follow the same procedure, but this time you will
have to specify the data source (in this case the PC).
For further information see the Synchronization_Configuration_Tool.pdf
How to transfer the old temp logger data to another PC?
Use the backup functionality (file-> export backup), which will generate a
zip-file with all logger data.
Then install the logger software at your new PC and apply the import backup
function to import the zip file created at the first PC.
I did modify several setup parameters in the software (e.g. names
and colours), which suddenly have disappeared.
In a standard situation, these data has been stored in the document
directory (TempLogSetting.xml). Inspect the directory for the setup data
(Logger Menu  save File setup-data) and check for the file
“TempLogSetting.xml”. Save the setup parameters in a directory for which
you always have sufficient rights.