User manual

User manual BS1000 LAN base station 11 / 18 July 5 2010
Time server
At the start up of the BS1000 and in certain time intervals (provided that the system has
been configured accordingly), the time is requested from an Internet time server and the
internal clock of the base system is updated by this time.
The clock of the BS1000 system is powered by a button cell when the station is switched
off. Therefore the BS1000 system will always register new measurement data after
switching on. This applies also for operation without PC nor network link.
The Messenger function is based on the availability of the internal clock. This clock uses
the standard time (UTC). The adjustment of the time zone is entered in minutes into the
field „Time Zone Offset“. The time indicated on the web pages of the BS1000 is local
time and based on the time parameters of the PC in charge of the browser.
Password
The admin pages of the BS1000 can only be accessed via a password. The standard
password is 'admin' and can be changed on this page.