User manual

User manual BS1000 LAN base station 18 / 18 July 5 2010
Battery
The BS1000 has a 3V Li CR2032 coin cell battery for powering the real time clock and
the settings memory during power down.
We advise to replace the battery every 3 years. Actual lifetime of the battery depends on
operating temperature, quality of the battery and the period of time it stays powered off.
When the BS1000 is powered on continuously, then a battery life of over 10-15 years can
be expected.
The coin battery cell is located at the centre of the circuit board of the BS1000.
Unlike the BS500, the BS1000 starts logging as soon as the BS1000 is powered on. No
further requirements are necessary. The only exception is the first time use or when the
coin battery was removed: Then the clock must be set, before logging can start. This can
be done via the USB port, connected to the temperature logger software, or by a remote
time server via the network.