User manual

User manual BS1000 LAN base station 5 / 18 July 5 2010
Software operation
The temperature data will be received and stored as soon as the Windows system has
been started. Therefore it is not necessary to start the temperature-logger program to store
new data.
The program offers following functions:
•Graphic display of the measured temperatures for every individual sensor
•Settings for every individual sensor
•Export data in various formats
For further details please refer to the on-line help for the program.
In addition to that, the CD contains two extra tools: the NetworkConfig program to help
you detect the network parameters that the BS1000 is using, and the RuleEditor which is
a tool to build the messenger-control file that you need to control the built-in Messenger
facility. Furthermore, the BS1000 web server offers some administrative pages for
various settings.
NetworkConfig
The NetworkConfig-tool requests the network parameters of a BS1000 connected via
USB. To this end, the temperature-logger software should be installed already. These
network parameters allow you to look directly at the BS1000 web server. The standard
settings of the BS1000 sets the network name to 'log' followed by two digits. This name
is depicted on the BS1000 housing. With this name you can browse directly to the
webserver of the BS1000. The networkconfig tool is used to read or change its network
settings directly, if first connection is not possible.
In addition to the data logger, the web server contains administrative pages in which you
can set the parameters of the various functions:
- Network parameter
- E-mail parameter
- Messenger parameter
- Sensor parameter
- Internet time parameter
- Password
- Event Log parameter
In conjunction to the temperature logger software, the network config program displays
following window: