User manual

User manual BS1000 LAN base station 6 / 18 July 5 2010
The window contains the following fields:
- Use DHCP: If this box is checked, the BS1000 will use the network settings of an
available DHCP server. In this case, the other fields below remain inactive. If this box is
not checked, the network settings are static and the other fields must be filled in.
- Address: the current IP address of the BS1000
- NetMask: the utilized net mask setting
- Gateway: the utilized Gateway-address
- DNS server: the current DNS server
- Network name: the network name of the BS1000
- DNS suffix: the network suffix as indicated by the BS1000.
The Read button asks the BS1000 to supply the parameters.
The Write button writes the parameters into the BS1000.
The BS1000 web server is located at the address defined by the network name, followed
by the DNS network addition. In the example shown above the BS1000 is located at the
address: http://log40.lan.
The standard network name is 'log', followed by 2 digits. This name is indicated on the
housing of the BS1000.
This method allows you to browse directly to the indicated address without any tools.