User manual

User manual BS1000 LAN base station 7 / 18 July 5 2010
BS1000 Web server
The built-in web server contains a few pages of the most recent measurements. Moreover
the program offers administrative pages for various settings.
The BS1000 web server is located at the address that has been defined by the network
name, followed by the DNS network addition. Please note that an eventual blocking by a
firewall and/or browser should be disabled as long as these apply to the BS1000.
For every single sensor, the Initial page shows the most recent measurements:
In this case, the latest measurement received per sensor is registered. The time indication
is formatted according to the standard setting of the computer. The rssi column displays
the radio strength of the signal received.
You can access the admin pages via the link called 'Admin' on top of the screen.
After entering the User ID and the password (the standard settings are admin/admin) the
program activates following window: