Instructions

11
1. MULTILOGGER INFORMATION
Starting up
- First please read this complete manual before you continue.
- More manuals can be found on the CD and in our
Multilogger Software HELP FUNCTION.
- Install the software, please refer to the manual on the CD-ROM!
Always check on www.arexx.com if you have the latest software
version at hand.
- Connect the USB receiver to the computer.
- Start the program.
- Insert batteries in the sensors.
- Consult the help function of the software if you have further
questions.
Important information about the MULTILOGGER Logger
- The receiver which is connected to the computer receives
the signals coming from the sensors.
- The computer can also collect the sensor data from a LAN
Network.
- The temperature sensors transmit their temperature data to the
receiver.
- Several temperature sensors can be connected to the system
at the same time.
- Separate sensors for the Multilogger are available at
your dealer.
- We have connected 60 sensors to one single USB receiver
without any problems.
- The software graphically shows the temperature measurements
of a longer period of time.
- Extra: Attractive screensaver software showing all sensors.
- The range of the sensors can vary as a result of environmental
 inuences.
Depending on the material properties of the surrounding areas, sensors
located inside refrigerator systems may not be able to communicate with
the receiver.
E
N
G
L
I
S
H