User manual

Hint: In the delivery condition, the robot is set to the WiFi AdHoc mode so that it can
communicate directly with a PC with a Wifi interface (Notebook, T-Tablet, etc.).
There are a variety of micro SD cards that have different characteristics
and are available in Marvin may not work properly. SD-XC cards as well as
SanDisk Ultra cards are generally not supported!
Marvin software updates consist of the disk image with the iRP software.
It also contains the appropriate firmware (hex-file).
The versions of iRP software version and firmware version are always the same!
2.3.2 iRP WebIDE
The web interface software and the Marvin documentation are already on the enclosed Micro SD card. If the
micro SD card is not already inserted in the robot, please do so carefully now.
Figure 2.4 Marvin with inserted SD Karte
Hint: The Micro SD card usually does not have to be removed from the robot. It is
protected so that it is protected from damage. However, you should not touch
the robot so the Micro SD card is damaged!
AREXX Engineering & JM³ Engineering
Version: 1.2.3
March 26, 2017 Page: 8