User manual

Precautionary Notes
• Check the polarity of the voltage.
• Always keep the electronic equipment dry. In the case of moisture immediately remove the batteries or
the power supply to power down the device. This precaution is needed to keep it from short circuiting.
Drying is needed to avoid corrosion.
• Remove batteries before long-term storage respectively remove the power supply if the robot is not to be
used for some time.
• Before using the device always check the status of the equipment including the cabling.
• As soon as you think the device cannot be used in a secured way you must remove the power supply and
take precautions the device cannot be used unintentionally.
• Ask an expert if you feel unsafe or unsure in handling the device.
• Never operate the robot in unfavourable locations or inconvenient conditions.
• The equipment does contain highly sensitive parts. Electronic modules are quite sensitive to electrostatic
discharge (ESD). Only handle devices at the edges and avoid direct contact to the parts on the PCB.
Normal use
This product has been designed as an experimental tableau for all persons who feel interested in robotics.
The main goal for this platform is the experience to learn programming the device in C/C++-language. The
robot is not to be considered as a toy! The device is not suitable for children under 14 years of age.
The robot has been designed for indoor use. The device should not be exposed to moisture or damp. Please
be careful to avoid condensation vapor, which may generate moisture if you transport modules from a cold
environment into a warm room. Wait a while and do not activate modules until the devices have been
acclimatized to the room temperature.
Any other type of mode of operation as prescribed may cause damage and risks such as short circuit, fire and
shocks, etc. the robot is to be used in closed, dry environments. The device shall not be exposed to moisture
or water.
AREXX Engineering & JM³ Engineering
Version: 1.2.3
March 26, 2017 Page: iii