User manual

1. TEMP LOGGER INFORMATION

Starting up

- First please read this complete manual before you continue.

- More manuals can be found on the CD and in our

Multilogger Software HELP FUNCTION.

- Install the software, please refer to the manual on the CD-ROM!

Always check on www.arexx.com if you have the latest software

version at hand.

- Connect the USB receiver to the computer.

- Start the program.

- Insert batteries in the sensors.

- Consult the help function of the software if you have further

questions.

Important information about the Temperature Logger

- The receiver which is connected to the computer receives

the signals coming from the sensors.

- The computer can also collect the sensor data from a LAN

Network.

- The temperature sensors transmit their temperature data to the

receiver.

- Several temperature sensors can be connected to the system

at the same time.

- Separate sensors for the Temperature Logger are available at

your dealer.

- We have connected 60 sensors to one single USB receiver

without any problems.

- The software graphically shows the temperature measurements

of a longer period of time.

- Extra: Attractive screensaver software showing all sensors.

- ATTENTION: The sensors are waterresistant but not waterproof!

- The range of the sensors can vary as a result of environmental

 inuences.

Depending on the material properties of the surrounding areas, sensors located

inside refrigerator systems may not be able to communicate with the receiver.

CHECK ALWAYS FOR THE LATEST LOGGER SOFTWARE !!!