User manual
13
TEMP LOGGER INFORMATION
Starting up
- Afterthisinformation,readthemanualontheCD-ROMrst.
- Install the software, please refer to the manual on the CD-ROM!
- Connect the USB receiver to the computer.
- Start the program.
- Insert batteries in the sensors (P. 11).
- Consult the help function of the software if you have further
questions.
Important information about the Temperature Logger
- The USB receiver which is connected to the computer receives
the signals coming from the sensors.
- The temperature sensors transmit their temperature data to the
receiver.
- Many temperature sensors can be connected to the system at
the same time.
- Separate sensors for the Temperature Logger are available at
your dealer.
- We have connected 60 sensors to one single USB receiver
without any problems.
- The software graphically shows the temperature measurements
of a longer period of time.
- Extra: Attractive screensaver software showing all sensors.
- ATTENTION: The sensors are not waterproof!
- If necessary, please put sensors which are positioned in a moist
location in a waterproof plastic bag.
- The range of the sensors can vary as a result of environmental
inuences.
Depending on the material properties of the surrounding areas,
sensors located inside refrigerator systems may not be able to
communicate with the receiver.
E
N
G
L
I
S
H