VoiceAmp® Revel™ VA20WB Series Manual and User Guide ARG-OM034-B Audio Resource Group, Inc. • 405 Main Ave W, Unit 4G • West Fargo, ND 58078 • ©2013 Audio Resource Group, Inc. • All Rights Reserved • www.argaudio.
SAFETY INFORMATION This product is designed to amplify sounds to a high volume level which could potentially cause hearing loss if used improperly and cause damage to your equipment. CAUTION! To protect your hearing and the hearing of others: 1. Always set all volume levels at the minimum setting before powering on your device. Then adjust the volume to a comfortable level. 2.
ARG-VA20WB VoiceAmp® Revel™: System Features System Controls Page 3
VA20WB VoiceAmp® REVEL™ Quick Use Guide 1. Plug in the battery charger to charge the battery: The VoiceAmp® REVEL™ will ONLY operate under battery power. FULLY charge the on-board lithium battery pack before using. To charge the battery, plug the included ARG-PS006 battery charger to the power charging jack located on the side of the speaker (the silver jack secured with a hex-nut.) Plug the other end into a 110-125V AC outlet.
VA20WB VoiceAmp® REVEL™ Troubleshooting Guide A. Thoroughly read the operation manual carefully to verify proper setup and installation of your system before using. B. If feedback (a high pitch squealing sound) occurs: Immediately move the microphone away from the speaker Reduce the master volume level on the speaker Reduce audio level of input device/s Reduce the microphone gain setting on the transmitter Move the microphone to the side and behind the speaker.
Warranty Statement Audio Resource Group, Inc. (ARG) develops, designs and manufactures our own products in order to provide high quality products which provide many years of trouble-free service. The following Warranty Statement defines the warranty periods for each product line and model of equipment manufactured by Audio Resource Group, Inc.