Instruction manual

72 A-Modell - 11/12 - Ausgabe 09/11 - 2096161 - BUE-0036-10EN
Living
6
Opening:  Press handle (Fig. 72,1) downwards and, at the same time, tilt it slightly
inward. The insect screen can be taken out of the locking devices situated
on both sides of the window frame.
 Use handle to return the insect screen slowly to its initial position.
6.9.4 Roman shade and insect screen
The windows are fitted with a Roman shade and an insect screen. The insect
screen can only be moved together with the Roman shade.
Roman shade The Roman shade is located in the bottom blind box.
Closing:
 Grip the Roman shade using the holding bar (Fig. 73,3), pull it from the
bottom to the top and then release it at the desired height. The Roman
shade will stay at this height.
Opening:
 Grip the Roman shade in the middle of the bar and push it down.
Insect screen The insect screen is located in the upper blind box.
Closing:
 Pull the insect screen down using the holding bar (Fig. 73,2), until it
touches the holding bar of the Roman shade (Fig. 73,3).
 Clip the catch (Fig. 73,1) on the insect screen into the handle of the Roman
shade.
Opening:
 Push the catch (Fig. 73,1) on the insect screen inwards.
 Move the insect screen back slowly on the holding bar (Fig. 73,2).
Fig. 73 Hinged window