EN TOWER FAN OPERATING INSTRUCTION Read the instructions carefully before operating the appliance or carrying out maintenance operations. Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damage. Keep these instructions in a safe place for future reference.
GENERAL SAFETY INFORMATION Use this fan only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to people. Ensure that the mains power complies with the voltage specified on the fan ’s data plate (220-240V~/50Hz).
personnel to examine the appliance or perform any electrical or mechanical repairs. The most common cause of overheating is the build-up of dust in the appliance. Remove dust deposits by unplugging the appliance and cleaning the air outlets and grilles with the aid of a vacuum cleaner. Do not use abrasive detergents for cleaning this appliance. Clean the appliance with the aid of a damp (not wet) cloth rinsed in hot soapy water. Always remove the plug from the mains socket before cleaning.
Do not position the fan below a socket outlet. Do not operate the appliance outdoors. WARNING: do not use the fan with a controller or any other external device that activates the appliance automatically, as there may be a risk of fire if the fan is covered or incorrectly positioned. WARNING: DO NOT DEPEND ON THE ON/OFF BUTTON SWITCH AS THE SOLE MEANS OF DISCONNECTING POWER. WHEN SERVICING OR MOVING THE FAN, ALWAYS UNPLUG THE POWER CORD. A fan has hot and arcing or sparkling parts inside.
ASSEMBLY INSTRUCTIONS 1. 2. 3. 4. 5. Open the box and remove the parts of the appliance. Spin 3 screws out from the turnplate. (Picture 1) Fasten the back base and front base each other. (Picture 2) Align with the base and turnplate screw, then spin into 3 screws. (Picture 3) Press the power cord into the line deduction. (Picture 4) Picture 1 Picture 3 Picture 2 Picture 4 DESCRIPTION OF PARTS a. Switch knob b. Remote control c. Body d. Screw e. Back base f. Front base g.
HOW TO USE THE APPLIANCE The appliance does not need to be installed. When you move the appliance, use the handle on the back. CONTROL PANEL AND AVAILABLE FUNCTIONS SWING button When the appliance is operating, touch this button to make the appliance oscillate automatically, shifting the air flow from left to right. Touch the button SWING again to interrupt the oscillation. ON/OFF button Touch the ON/OFF button on the control panel or remote control.
INFORMATION FOR CORRECT DISPOSAL OF THE BATTERIES IN ACCORDANCE WITH EUROPEAN DIRECTIVE 2006/66/EC Please replace the battery when its electrical charge has been exhausted: at the end of its useful life, it must not be disposed of together with unsorted waste. It must be must be delivered to appropriate separated waste disposal plants or to dealers that provide a similar service.
