Install Instructions

9
AZ-6CP CONTROL BOARD
1. Transformer - 75VA, 120V/24V 50 HZ
2. Circuit Breaker Reset Switch
3. Transformer Spade Terminals (120 Vac) (Primary)
4. Transformer Spade Terminals (24 Vac) (Class 2)
5. Isolated End Switch X-X
6. Data Port Terminal - used for communication with the Argo
DPM-2 Outdoor Temperature Setback Control
7. LED Array (see “AZ-4CP Control Board” in this manual for
specications)
8. Thermostat Terminals (Class 2)
9. Green Indicator LED - indicates zone is calling for heat
10. Field Selectable Option Dip Switches (see “Field Selectable
Option Switches” in this manual for explanation)
11. Red Indicator LED - indicates zone valve is fully open
12. Zone Valve Terminals (Class 2)
13. ZC on Green Indicator LED
14. Priority Pump Terminals (Primary)
15. ZR-ZC Terminals (used for tankless coil applications) (Primary)
16. Source Power Terminals (Primary)
17. Primary Pump Terminals (Primary)