User Manual
Argo Service Manual Brake System
BR-11
Ontario Drive & Gear Limited www.argoutv.com
PH.(519)- 662-2840 FAX (519)- 662-2421
Brake Pad Inspection Procedure (HDi - Service Brake Pads)
Inspect the brake pads after every 25 hours of operation. Worn, glazed or contaminated brake
pads affect the efciency of the brake system. To inspect the pads, rst remove the rewall.
With the rewall removed, both handbrake hydraulic brake calipers are visible. Each caliper
has 2 brake pads which are secured by (2) 3/8” Socket Head bolts. Inspect all 4 brake pads.
Replace the pads when:
• the brake lining material molded to each
metal backing plate is worn to 0.035"
(1/32”) thickness. (Figure 7-19c).
• the pads are glazed and brake performance
is affected.
• the pads are contaminated with lubricant,
and brake performance is affected.
Removing the Service Brake Pads (HDi)
1. Perform the Servicing Procedure, Removing the Firewall
2. Locate and remove the two (2) fasteners securing the Service Brake Caliper to the
mounting Bracket. Photo 4
3. Slide the service brake pads from the caliper. Photo 5
Photo 4 Photo 5
4. Perform the Servicing Procedure, Brake Pad Inspection (HDi - Service Brake Pads).