User Manual

Argo Service Manual Brake System
BR-13
Ontario Drive & Gear Limited www.argoutv.com
PH.(519)- 662-2840 FAX (519)- 662-2421
5. After the 10 cycles are complete shut down the Argo and allow at least 30 minutes for
the brakes to cool down.
6. Once the brakes have sufciently cooled down, repeat the entire process a second time
following steps 1-3.
7. The bedding in procedure is now complete
Hydraulic Brake Calipers
Maintenance Schedule - Inspect every 50 hrs of vehicle operation
CAUTION
The brakes must be inspected regularly by a qualied authorized Argo dealer/me-
chanic. Damaged or leaking calipers can seriously impair the ARGO steering/brak-
ing capability. Severe personal injury or property damage could result from a dam-
aged or poorly adjusted brake system.
Inspect the calipers for the conditions listed in the following chart and then perform
the recommended servicing procedures.
Condition Corrective Action Servicing Procedure Page
Cracked or Broken Replace Immediately Hydraulic Brake Caliper Re- BR-10
Calipers moval
Broken or Missing Brake Caliper Service BR-11
CotterPins and Repair
Hydraulic Caliper Installation BR-14
Hydraulic Fluid Inspect Caliper Hydraulic Brake Caliper Re- BR-10
Leakage Casting and “O” Ring moval
Inspect Hoses and Brake Caliper Service and
Connections Repair BR-11
Inspecting the Hydraulic
Brake line BR-26
Hydraulic Caliper Installation BR-14