User Manual

Brake System Argo Service Manual
BR-16
Ontario Drive & Gear Limited www.argoutv.com
PH.(519)- 662-2840 FAX (519)- 662-2421
Photo 8 Photo 9
5. Take the caliper assembly from the vise and separate the 2 halves. Photo 10
6. Lift the piston seals and small “O” ring from the caliper halves and discard.
Photos 11 & 12
7. Remove the bleed screws and check the steel ball from the caliper casting.
Photo 13
8. Clean all components in a varsol bath, then a mild soap solution. Use compressed air
to blow out the caliper castings. This will free up any dirt or other contaminants you
could not reach with the cloth.
Photo 10 Photo 11