User Manual

Brake System Argo Service Manual
BR-18
Ontario Drive & Gear Limited www.argoutv.com
PH.(519)- 662-2840 FAX (519)- 662-2421
Photo 14 Photo 15
CAUTION
Do not scratch or tear the seals during installation. Any damaged seal must be re-
placed immediately.
5. Insert the pistons so that the cavity side is facing up.
6. Place the one half caliper into the aluminum jawed vise being careful not to damage it
by overtightening it. Locate the oil journal which requires the small “O” ring. Place
the “O” ring over the hole making sure that the at edge of the ring is facing down.
Photo 16
7. Place the other half caliper to the one secured in the vise making sure that the oil jour-
nal of the top half is aligned with the previously installed “O” ring in the lower half.
Photo 17
Photo 16 Photo 17