User Manual

Brake System Argo Service Manual
BR-20
Ontario Drive & Gear Limited www.argoutv.com
PH.(519)- 662-2840 FAX (519)- 662-2421
NOTE
When re-installing the calipers to the transmission, ensure any shims that may have been
used between the caliper and transmission mounting boss are re-installed. Earlier models
may have employed shims to correctly align the calipers with the brake discs.
WARNING
NEVER attempt to align these with the engine running and in gear.
Photo 21 Photo 22
12. Re-attach the brake line at master cyl-
inder. Photo 23
NOTE
Always use new copper washer seals at all
brake line connections.
13. Perform the servicing procedure, Bleed-
ing the Hydraulic Brake System.
Photo 23
Removing the Master Cylinder
CAUTION
Clean around the Master Cylinder lid area of any dirt and debris before removing the
master cylinder covers. This will prevent dirt from contaminating the brake system.
Contaminants in the brake uid can damage components or cause premature wear.