User Manual

Brake System Argo Service Manual
BR-36
Ontario Drive & Gear Limited www.argoutv.com
PH.(519)- 662-2840 FAX (519)- 662-2421
6. Lubricate and install mounting hole bushings to O-Rings installed in Step 2.
Photo 54
7. Assemble the caliper back together and torque to specications. Photo 55
Photo 54 Photo 55
8. Loosely re-attach the brake line to the Service Brake Caliper (Photo 56) and assemble
the caliper and brake pads back to the vehicle. Photo 57. Torque mounting bolts to
specications.
Photo 56 Photo 57
NOTE
Use brake cleaner on components before re-assembly to remove oil and other contaminants.
CAUTION
Ensure the brake pads are NOT installed backwards. The pad side must be installed
towards the brake disc. The brake pads utilize a black coloured anti-squeal coating
on the opposite side of the pad which could be mistaken for the pad surface.