User Manual
Brake System Argo Service Manual
BR-42
Ontario Drive & Gear Limited www.argoutv.com
PH.(519)- 662-2840 FAX (519)- 662-2421
Photo 66 Photo 67
8. Perform the servicing procedure, Brake Disc Inspection.
Installing a Brake Disc (Models with 34-100 Transmission)
1. Apply anti-seize compound to the spline of the output shaft.
2. Align the splines of the brake disc with those of the output shaft and slide the brake
disc on to seat up against the shoulder. Photo 68
IMPORTANT
The brake disc should slide on by hand. Do NOT force or hammer to install.
3. Secure with the bolt and at washer. Torque to specications Photo 69
Photo 68 Photo 69
4. Slide the idler shaft sprocket back into position and seat the retaining ring back to the
original groove. Photo 70 & 71