User Manual

Argo Service Manual Brake System
BR-61
Ontario Drive & Gear Limited www.argoutv.com
PH.(519)- 662-2840 FAX (519)- 662-2421
5. Split and remove the caliper assembly.
Photo 125 Take note of all spacers,
shims and washers within the assem-
bly. Refer to your illustrated parts list in
your Argo Parts manual for all locations
of these components.
Photo 125
6. Locate the 850-84 Dead Side Brake Housing and remove the screw securing the brake
puck. Remove the brake puck and discard. Photo 126
7. Locate the Live Side Brake Housing and turn upside down to remove 2nd brake pad
from the housing cavity. Please note that there is also a washer placed beneath the
brake pad.
8. Lay out both Dead Side and Live Side Brake housings with new brake pads.
Photo 127.
Photo 126 Photo 127
9. Install the new brake pad to the dead side housing and secure with screw. Apply some
Blue LOCTITE 243 to the threads of the screw before installing.