User Manual

Brake System Argo Service Manual
BR-62
Ontario Drive & Gear Limited www.argoutv.com
PH.(519)- 662-2840 FAX (519)- 662-2421
10. Locate the live side brake housing and
slip the shim washer into the cavity rst
(Photo 128), before installing the brake
pad.
11. Install the second brake pad to the top of
the previously installed shim.
Photo 128
Reassembling the Emergency/Parking Brake Caliper to the Vehicle
`
NOTE
The following example illustrates the assembly of the left hand side Emergency/Parking-
Brake Caliper.
NOTE
Use brake cleaner on components before re-assembly to remove oil and other contaminants.
IMPORTANT
Mounting bolts for both calipers are always inserted facing to the left with the head
of the mounting bolt on the right hand side of the caliper. Refer to Photos A & B for
correct orientation of mounting bolts as well as washer & shim locations.