User Manual

Brake System Argo Service Manual
BR-66
Ontario Drive & Gear Limited www.argoutv.com
PH.(519)- 662-2840 FAX (519)- 662-2421
Photo 138 Photo 139
4. Remove both Front and Mid Front Chains connected to the Output Shaft Assembly.
Photo 140 & 141. Refer to servicing procedure, Removing a Drive Chain if neces-
sary.
Photo 140 Photo 141
5. Remove the ve (5) fasteners securing the Output Shaft Assembly to the Output Shaft
Coupler. There is a nut to the inside of each fastener. Photo 142 & 143
6. Locate the (2) set screws at the outer bearing and loosen. Photo 144
7. Loosen off each nut at the outer bearing ange. Photo 145