User Manual
Argo Service Manual Brake System
BR-69
Ontario Drive & Gear Limited www.argoutv.com
PH.(519)- 662-2840 FAX (519)- 662-2421
3. Insert the Output Shaft Assembly into Outer Bearing by tilting it upwards and then
levelling out to connect to Output Shaft Coupler. Photos 154 & 155
Photo 154 Photo 155
4. Install the ve (5) fasteners required to connect Output shaft Assembly to Coupler and
torque to specications. Photo 156
IMPORTANT
Apply anti-seize compound to the shoulder part of all fasteners and ensure all have
had Blue 243 LOCTITE applied to the threads and that the lockwasher has been re-
installed along with the locknut to the inside. Torque to specications.
5. Apply Blue 243 LOCTITE to the outer bearing set screws and install them into the
bearing collar. Ensure they are aligned with the countersink in the Output Shaft As-
sembly. Photo 157
Photo 156 Photo 157
6. Tighten down all Bearing Flange Locknuts and the Outer Bearing. Torque to specica-
tions Photo 158
7. Perform the servicing procedure, Installing a Drive Chain. Photo 159 & 160