User Manual

Argo Service Manual Brake System
BR-73
Ontario Drive & Gear Limited www.argoutv.com
PH.(519)- 662-2840 FAX (519)- 662-2421
Photo 168 Photo 169
Vehicles manufactured from 22441
i. Remove the (2) Spring Pins and Steering Arms from the Steering Shaft. Photo 169
A Retaining Ring is located between the (2) steering arms.
Reassembling Steering Column - Prior to 22441
i. Install the Spring Pin into the Steering Shaft at the 4th hole from the end. Photo 171
The roll pin should be installed such that the slot of the pin is parallel with the shaft,
and an equal amount of pin protrudes on each side of the shaft. Photo 172
Photo 171 Photo 172
ii. Slip the rst Steering Arm on to the Steering Shaft, followed by the Retaining Ring,
seating it to the groove on the shaft. Install the second Steering Arm. Orient them as
illustrated in Photo 173
iii. Install the 2nd Spring Pin, followed by a centering spring. Install the 3rd Spring Pin,
followed by a 2nd centering spring and 4th Spring Pin. Photo 174 & 175