User Manual

Argo Service Manual Brake System
BR-77
Ontario Drive & Gear Limited www.argoutv.com
PH.(519)- 662-2840 FAX (519)- 662-2421
14. Set the Handle Bar assembly into place and cover with the Upper Handle Bar Clamp.
The Handle Bar clamp is secured into place with (4) fasteners. Tighten down the fas-
teners in an "X" pattern indifferent to starting location at a torque specication of 10
- 12 Ft. LBS (13.5 - 16N.m) Photo 187
Photo 187
15. Apply rm pressure to handle bars in each steering direction to seat the roll pins.
16. Reattach the hand brake lever cable across the two brake steering arms.
17. Perform the servicing procedure, Hydraulic Plunger Pin Adjustment.