User Manual

Brake System Argo Service Manual
BR-8
Ontario Drive & Gear Limited www.argoutv.com
PH.(519)- 662-2840 FAX (519)- 662-2421
NOTE
You may leave the brake uid line connected to the caliper.
The left hand caliper requires the removal of the drive belt and driven clutch to access the
mounting bolts to the transmission. Refer to, Removing the Driven Clutch, and Removing
the Drive Belt, in Section CS of this service guide.
4. Remove the 2 socket head fasteners and at washers (later models utilize lockwashers).
Photo 1 Slide the caliper from the brake disc.
5. Remove the two (2) cotter pins securing the brake pads in the caliper. Photo 2
Photo 1 Photo 2
6. Slide the pads forward and out of the calipers. Photo 3
7. Perform the procedure, Hydraulic Brake Pad Inspection.
Photo 3