Operation Manual

23
EG
The control panel is located on the front of Emix Tank.
From top to bottom we can see:
1...5: GREEN LED: they indicate the water tempera-
ture, both in the con guration menu (desired
temperature) and in the operation menu (actual
temperature).
6 BLUE LED: It indicates the activation of the elec-
trical heaters.
Fixed: one or more activated heaters.
Flashing: BOOSTER mode selected.
7 YELLOW LED: it indicates the status of the anti-
legionella cycle.
Fixed: active cycle.
Flashing: active cycle, but not closed.
8 RED LED: it indicates that the unit is in stand by.
9 BUTTON for con guration of operation settings.
10 RECEIVER of infrared signal from the remote
control (at the moment the use of the IR signal is
reserved for factory procedures).
CONTROL PANEL
1
2
3
4
5
6
7
8
9
10
°C LED 1 LED 2 LED 3 LED 4 LED 5
40 F

45

50
F

55

60

F

65

70

F
75

80

F
85

WATER TEMPERATURE OR DESIRED TEMPERATURE DISPLAY:
F Flashing LED
LED ON
LED OFF