Operation Manual

ManualsBrandsArgo ManualsAir ConditioningIridium

V 03/17

Read the instructions carefully before operating the appliance or carrying out maintenance operations.

Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damage.

Keep these instructions in a safe place for future reference.

DESK FAN

OPERATING INSTRUCTIONS

Summary of content (5 pages)

PAGE 1
EN DESK FAN OPERATING INSTRUCTIONS Read the instructions carefully before operating the appliance or carrying out maintenance operations. Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damage. Keep these instructions in a safe place for future reference.
PAGE 2
GENERAL SAFETY INFORMATION  Use this fan only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to people.  Ensure that the mains power complies with the voltage specified on the fan ’s data plate (220-240V~/50Hz).
PAGE 3
 It is not advisable to use extension cords, as these may overheat and cause the risk of fire. Do not use a single extension cord to operate multiple appliances.  Do not immerse the cord, plug or any other element of the appliance in water or other liquids.  Do not touch the plug with wet hands.  Do not place the fan above or near another heat source.  Do not run the cord under carpets. Do not cover the cord with blankets, carpets or similar materials.
PAGE 4
DESCRIPTION OF PARTS 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. Oscillation knob Switch knob Motor Power cord Adjusting knob Base set screw Base Rear guard Set screw Blade Nut Screw Front guard ASSEMBLY INSTRUCTIONS 1. After removing everything from the carton, locate the motor unit and separate the front guard and back guard if they are connected. 2. Locate the rear guard and align with the motor unit; the safety grille will only fit one way: with the handle facing up.
PAGE 5
MAINTENANCE AND STORAGE ALWAYS UNPLUG THE APPLIANCE BEFORE CLEANING OR MAINTENANCE. IMPORTANT: DO NOT SUBMERGE THE FAN IN WATER. Cleaning the outside surface of the appliance Turn the switch off and unplug before carrying out any maintenance work or moving the appliance. Use a soft cloth to remove any dust from the fan. If the fan is excessively dirty, use a soft cloth moistened with water and a mild detergent at a temperature lower than 50°C. Let the fan dry completely before use.