EN EVAPORATIVE AIR COOLER OPERATING INSTRUCTIONS Read the instructions carefully before operating the appliance or carrying out maintenance operations. Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damage. Keep these instructions in a safe place for future reference.
GENERAL SAFETY INFORMATION Only use this appliance as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to people. Make sure that the type of mains power complies with the electrical requirements of the appliance (220 V~/50 Hz).
Do not use the appliance if the cord or plug is damaged. Do not attempt to change the power cord yourself. If the power cord is damaged, it must be replaced by the manufacturer, dealer or a similarly qualified person so as to avoid any safety risks. Do not bend or stand heavy objects on the power cord. Warning!!! Do not touch Risk of electric shock! Turn the switch off and unplug before carrying out any maintenance work or moving the appliance.
DESCRIPTION OF PARTS 1. 2. 3. 4. 5. 6. 7. 8. Button Blade Function display window CD grain decorative sheet Front shell Water level display window Universal casters Handle 9. 10. 11. 12. 13. 14. 15. 16. Remote repository Back shell Air filter Reel Power cord Water tank Casters Tank lock HOW TO USE THE APPLIANCE The appliance does not need to be installed.
DISPLAY AND CONTROL PANEL ON/OFF 1. 2. 3. 4. 5. 6. 7. 8. 9.
REMOTE CONTROL ON/OFF BUTTON In power on state, press this button, the unit turns off and enters standby mode. In power off state, press this button and all LED lights flash sequentially clockwise; then it enters default working state, except the Timing, Sleep and Natural mode.
Below is default working states: MODE BUTTON In power on state, press this button to switch the working mode among Normal, Natural, Sleep e Smart. Normal mode: the unit runs at a constant speed setting; Natural mode: the unit runs at changing wind speed; in natural wind state, LED only displays the set level, which doesn’t change with the wind speed, same as natural wind.
TIMING BUTTON a. After turning on, the timer indicator is turned off by default and the digital tube displays ambient temperature; when the button is first pressed, the timer sets to 30 minutes; the time increases by 30 minutes when the button is pressed every time, and the timer can be set up to 8 hours; if the button is pressed again, the digital tube displays 00, and the timer turns off; press the button again to repeat the cycle; b.
FILLING THE WATER TANK THE TANK MUST BE FILLED WITH DEMINERALIZED WATER FOR THE APPLIANCE TO OPERATE IN COOLER/HUMIDIFIER MODE. Water tank locked Water tank unlocked Water tank pulled out Filling water Counter-rotate the tank knob by 90° and remove it from its slot; fill it with demineralized water, up to the maximum level mark. Reposition the tank and turn the knob.
Pannello Filtro Clean the dust filter using a soft brush or a vacuum cleaner, and wash it in a solution of water and mild detergent. Remove the cooling panel at the same time and soak it in a solution of water and mild detergent. Take out the tank and and rinse it under running water, removing any residue. Let the filter, the panel and the tank dry completely after washing them; then re-fit the components in the following order: water tank, cooling panel and dust filter. .
