EN MISTING FAN OPERATING INSTRUCTIONS Read the instructions carefully before operating the appliance or carrying out maintenance operations. Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damage.
GENERAL SAFETY INFORMATION Only use this appliance as described in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to people. Make sure that the type of mains power complies with the electrical requirements of the appliance (220 V~/50 Hz).
Do not use the appliance if the cord or plug is damaged. Do not attempt to change the power cord yourself. If the power cord is damaged, it must be replaced by the manufacturer, dealer or a similarly qualified person so as to avoid any safety risks. Warning!!! Do not touch Risk of electric shock! Turn the switch off and unplug before carrying out any maintenance work or moving the appliance. Always unplug from the socket when the appliance is not in use.
DESCRIPTION OF PARTS 1. Button 2. Digital screen 3. Control panel 4. Misting plate 5. Air guide wheel 6. Front cover 7. Water level view 8. Anti-tilt bar 9. Handle 10. Back guard 11. Water tank 12. Drain cover 13. Swivel castor 14.
HOW TO USE THE APPLIANCE The appliance does not need to be installed. Position the unit on a flat, stable surface and connect the power cord to a suitable power socket (230 V~): you will hear a sound to indicate that the appliance is in standby and the fan can be switched on using the ON/SPEED button. The fan can be switched off using the OFF button. When you move the appliance, use the handle on the back.
ON/OFF：Press the ON/OFF button, the fan will start with nature wind mode, and fan function icon is lighten on the screen at the same time, the wind speed display at 1. The Natural wind mode means that the fan will in the way of: running 2 seconds and stopping for 3 seconds alternatively. Press this ON/OFF button again, all functions will shut off. SPEED : Press this button, the wind speed will change to normal wind mode low speed, and the screen will display at 2.
The remote control has six buttons whose functions are identical to those on the control panel (already illustrated in detail). It works at a maximum distance of 5 meters from the appliance and at a maximum angle of 45°. HOW TO INSERT / REMOVE THE REMOTE CONTROL BATTERIES (refer to the diagram below) Open the battery cover on the back of the remote control (press and pull the cover). Place the batteries inside the cover, making sure the polarity is correct.
Cleaning the tank (every about 2 weeks) Take out the tank and and rinse it under running water, removing any residue. Let the dry completely after washing them; then re-fit it. Misting box cleaning (about every 2 weeks) Pull the misting lead off the misting box, then use a soft cloth dampened with water and a mild detergent to clean the misting box and dry it with a dry cloth. Mist tube Mist base Drain Cleaning of the mist plate 1. Pull out the decorative ring on the mist plate ①. 2.
INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EUROPEAN DIRECTIVE 2002/96/EC When this appliance reaches the end of its useful life, it must not be disposed of with household waste. It must be delivered to appropriate separated waste disposal plants or to dealers that provide a similar service.
