EN AIR PURIFIER OPERATING INSTRUCTIONS Read the instructions carefully before operating or servicing the air purifier. Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damage. Store these instructions in a safe place for future reference.
GENERAL OPERATING AND SAFETY INSTRUCTIONS This appliance is a highly efficient air purifier designed for domestic use only! Use this air purifier only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or malfunctions. The unit must be placed in a vertical position at all times. Ensure that the available power source conforms to the required voltage and frequency (220 - 240V/50Hz).
Do not place heavy objects on the appliance. Do not use the appliance on unstable or sloping surfaces. The air purifier must be placed at least 50 cm from the wall or from other obstacles, to ensure proper heat dissipation. Close all open windows to maximise air purification efficiency. Do not insert objects or sharp instruments into the air outlet grille. Do not cover the air intake and outlet grilles in any way.
DESCRIPTION OF PARTS FRONT VIEW 1 2 1) CONTROL PANEL 2) AIR OUTLET 3) PLUG 3 REAR VIEW 4 4) HANDLE 5) AIR INLET 5 PRE-FILTER. Its main function is to filter the coarsest particles, which consequently allows for extending the life of the HEPA filter. ACTIVATED CARBON FILTER: absorb smell. HEPA FILTER. It can filter particles with a diameter above 0.3 microns and effectively eliminates pollen, smoke, animal hairs, mould and dust. IONISER. Generates a large amount of negative ions.
CONTROL PANEL POWER Connect unit to supply: you can hear a beep and all the LEDs flash. The LED on AQI button flashes for 3" taking various colors: blue, orange and red. After two minutes the sensor is ready to work: all the LEDs turn off except the POWER one and the unit is on standby. ON/OFF BUTTON Press this button to turn on the unit in AUTO mode. The sensor needs two minutes to be able to work consistently: during this time the fan speed is set on medium speed (orange LED).
CLEANING AND REPLACEMENT OF THE FILTERS Filter life will be vary by usage and environment. Press the lever down and pull the rear panel towards you. After removing the rear panel, remove the filter unit in the following order: back over and composite filter. Cleaning the pre-filter For improved efficiency, the pre-filter should be cleaned regularly. First use a vacuum cleaner then water to wash the pre-filter. Use neutral detergent if the pre-filter is very dirty.
CLEANING AND MAINTENANCE Warning Always pull the air purifier's plug out of the power socket before cleaning it, to prevent electric shocks or malfunctions. Warning Do not wet or immerse the air purifier in water, as this may cause electric shocks. Use a damp and soft cloth to clean the outer surface of the air purifier. Do not use solvents, petrol, xylene, talcum powder or brushes to clean the unit: these may damage the surface or colour of the casing.
INFORMATION ON CORRECT DISPOSAL OF THE PRODUCT ACCORDING TO EUROPEAN DIRECTIVE 2012/19/EU ON THE DISPOSAL OF ELECTRICAL AND ELECTRONIC WASTE MATERIALS' This appliance must not be scrapped with domestic waste at the end of its life cycle. We call your attention to the crucial role played by the consumer in the reuse, recycling and other forms of recovery of such waste.