Operation Manual

V 11/15

Analysing faults and solutions

Error codes

In the event of a fault, the temperature indicator on the indoor unit will flash to display the

corresponding error code. Refer to the following list to identify the error code.

Error code Faults and solutions

Can be eliminated by turning the unit off and on again.

Otherwise, contact a qualified technician for assistance.

Can be eliminated by turning the unit off and on again.

Otherwise, contact a qualified technician for assistance.

Can be eliminated by turning the unit off and on again.

Otherwise, contact a qualified technician for assistance.

Can be eliminated by turning the unit off and on again.

Otherwise, contact a qualified technician for assistance.

Contact a qualified technician for assistance.

N.B.: In the event of other error codes, contact a qualified technician for assistance.

Warning

If you experience any of the following problems, turn the air conditioner off and immediately

disconnect the power. Then contact your local Technical Service Centre.

• The power cable is damaged or has overheated.

• The unit makes an unusual noise during operation.

• The circuit breaker keeps tripping.

• The air conditioner emits a burning smell.

• The indoor unit is leaking.

• Do not attempt to repair or reinstall the air conditioner yourself.

• If the air conditioner is operated in abnormal conditions, malfunction, electric shock or fire

may result.