Operating Instructions and Installation Instructions

V 03/17
55
sinistra
posteriore
sinistra
destra
posteriore
destra
destra right
posterioredestra rearright
sinistra left
posterioresinistra rearleft

foro da
praticare
sinistra
destra
destra right
forodapraticare holetobedrilled
sinistra left
Step five: connect the indoor unit pipe
Position the pipe joint in the corresponding
bellmouth.
Pre-tighten the union nut by hand.
dado raccordogiunto tubo
tubo
giunto pipe
tubo joint
dado union
raccordo nut
Adjust the torque according to the following table. Position the open-end spanner on the pipe joint
and position the torque wrench on the union nut. Tighten the nut with the wrench.
chiave
dinamometrica
chiave
a forchetta
tubo interno
tubo
dado raccordo
chiaveaforchetta open‐endspanner
chiavedinamometrica wrench
tubointerno innerpipe
dadoraccordo unionnut
tubo pipe
Hex nut diameter Tightening torque (Nm)
6.35
15 – 20
9.52
35 – 40
tubo isolante
tuboisolante insulatingtube
Wrap the indoor pipe and the joint of the
connecting pipe with an insulating tube. Then
wrap with tape.
Step six: install the condensate drain pipe
Connect the drain pipe to the outlet pipe of the
indoor unit.
Bind the joint with tape.
tuboisolante insulatingtube
tubo di scarico
nastro
tubo d'uscita
tubo di
uscita
tubo di scarico
tubo di scarico
tubo isolante