Operating instructions

V 04/14

• A carbon fiber heater has hot and arcing or sparkling parts inside. It must not be used in potentially dangerous locations

such as flammable, explosive, chemical-laden or wet atmosphere.

• Do not place the carbon fiber heater on soft surfaces, like a bed, where openings may become blocked. Always place the

carbon fiber heater on a stable, flat, level surface when operating, to avoid the chance of the carbon fiber heater

overturning. Locate the power cord so the carbon fiber heater or other objects are not resting on it.

• Always unplug the carbon fiber heater when not in use.

• In order to avoid accidents turn unit off if unattended.

• In the event of any problems (abnormal noise or a strange smell) switch off the appliance immediately, do not

attempt to repair it and take it to your local after sales service.

ASSEMBLY INSTRUCTIONS

Let the power cable go through the fairlead located in the central part of the base and assemble the body and the base of

the appliance with the two screws.

Position the unit on a flat, stable surface.

When you move the appliance, use the handle.

DESCRIPTION OF PARTS

1. On/off selection knob

2. Swing button

3. Carbon fiber heating elements

4. Handle

5. Base

6. Anti tip device

7. Fixing screws

8. Fairlead

9. Cable reel

HOW TO USE THE CARBON FIBER HEATER

Connect the power cord to a suitable electric socket (220-240V~/50Hz).

Place the On/off and selection knob in the desired position: ECO (500 W) or COMFORT (1000 W).

SWING button

When the appliance is operating, touch the button to make the appliance swing automatically, shifting the air flow from

left to right. Touch the button again to interrupt the oscillation.