Operating instructions

V 06/10

WARNING: do not use the fan heater with a controller or any other device that activates the appliance

automatically, as there may be a risk of fire if the fan heater is covered or incorrectly positioned.

• Upon initial start-up, the fan heater may emit a slight, harmless smell. This smell is a normal effect of the initial heating up

of the internal heating elements, and should not recur later on.

• Do not attempt to repair, disassemble or modify the appliance: it doesn’t contain parts that can be repaired by the user.

• Turn the switch off and unplug before carrying out any maintenance work or moving the appliance. Always unplug from

the socket when the product is not in use.

WARNING: ALWAYS UNPLUG WHEN CARRYING OUT MAINTENANCE WORK OR MOVING THE FAN HEATER

• Do not place anything on the appliance; avoid placing wet garments on the convector.

• Turn the appliance off if unattended in order to avoid accidents.

• If the appliance is not used for prolonged periods, disconnect the plug, replace the convector in its box and store it in a

dry, ventilated place.

• Ensure that the air inlet /outlet are not close to walls or curtains when the appliance is in use, so as to avoid obstructing

the convector and hampering its efficiency.

• Should you hear an abnormal noise or detect an unusual smell when using the fan heater, cease use and unplug

immediately.

• Do not expose the elderly or children to a continuous flow of air.

PARTS DESCRIPTION

A. Air outlet grille

B. Air suction grille

C. Thermostat knob

Minimum “*”

Maximum “I”

D. On/off and selection knob

0 = off

u = cool air

I = hot air (1000 W )

II = very hot air (2000 W )

WARNING:

DO NOT DEPEND ON THE ON/OFF BUTTON SWITCH AS THE SOLE MEANS OF DISCONNECTING

POWER. WHEN SERVICING OR MOVING THE HEATER, ALWAYS UNPLUG THE POWER CORD.

BACK VIEW