Operating instructions

7
V 05/13
 Do not place the fan heater on soft surfaces, like a bed, where openings may become blocked. Always place the fan
heater on a stable, flat, level surface when operating, to avoid the chance of the fan heater overturning. Locate the power
cord so the fan heater or other objects are not resting on it.
 Always unplug the fan heater when not in use.
 In order to avoid accidents turn unit off if unattended.
 In the event of any problems (abnormal noise or a strange smell) switch off the appliance immediately, do not
 attempt to repair it and take it to your local after sales service.
DESCRIPTION OF PARTS
1. On/off and selection knob
2. Thermostat knob
3. Air outlet grille
4. Air suction grille
5. Carrying Handle
HOW TO USE THE FAN HEATER
Put the fan heater vertically on a flat and stable surface.
Connect the power cord to a suitable electric socket (220-240V~/50Hz).
Turn the thermostat knob clockwise to maximum position “+”.
Turn on the On/off and selection knob, the pilot light switch on: select one of the possible positions:
Cold ventilation
, ECO mode (900W) or COMFORT mode (1800 W).
CONTROL PANEL AND AVAILABLE FUNCTIONS
The thermostat maintains the desired room temperature by automatically switching on/off the fan heater.
As you rotate the knob clockwise, the room temperature increases.
Operate the unit until the room reaches a comfortable temperature, then turn the knob thermostat knob counter-clockwise until
you hear a "click" and the unit will shut down; then turn again slightly (just a little) the thermostat knob clockwise, in this
position the thermostat will maintain the temperature you have chosen.
3
2 5
1
4
COMFORT mode:
maximum heating power
(
18
00W)
ECO mode: 900 W reduced
power and consumption to
save energy .
OFF: fan heater off in
position “O”.
Cold
ventilation
LED BLUE
ON / OFF
Thermostat adjustment
knob: from
Minimum “-”
Maximum “+” temperature,
by turning the knob
clockwise.