Operating instructions

ManualsBrandsArgoclima ManualsDomestic AppliancesHi Floor Classic

V 05/10 1

OPERATING INSTRUCTIONS

Read the instructions carefully before operating the convector or carrying out maintenance operations.

Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damages.

Store these instructions.

ELECTRIC CONVECTION HEATER

Summary of content (5 pages)

PAGE 1
EN ELECTRIC CONVECTION HEATER OPERATING INSTRUCTIONS Read the instructions carefully before operating the convector or carrying out maintenance operations. Observe all the safety instructions; failure to observe the instructions may lead to accidents and/or damages. Store these instructions.
PAGE 2
GENERAL SAFETY INFORMATION • Use this convector only as outlined in this manual. Any other use not recommended by the manufacturer may cause fire, electric shock or injury to persons. • Ensure that the mains voltage complies with that indicated on the convector data plate (220-240VAC/50Hz). • Remove the convector from its packaging and check that it is in good condition before use. Keep any plastic bags away from children.
PAGE 3
WARNING: do not use the convector with a controller or any other device that activates the convector automatically, as there may be a risk of fire if the convector is covered or incorrectly positioned. • Upon initial start-up, the convector may emit a slight, harmless smell. This smell is a normal effect of the initial heating up of the internal heating elements, and should not recur later on. • Do not attempt to repair, disassemble or modify the convector.
PAGE 4
HOW TO ASSEMBLE THE FEET SUPPLIED The convector is packed without feet. These must therefore be assembled before using the appliance. To fix the feet supplied to the convector base, insert each at one of the two sides of the base, and slide them to the limit stop. View from below of the side of the convector base without the foot fitted. Convector foot to be inserted laterally in the specific space. The foot must be allowed to slide along the specific grooves, in the direction indicated by the arrows .
PAGE 5
OPERATING TIMER (HI FLOOR CLASSIC T model) The HI FAN CLASSIC T model is equipped with a very simple timer that allows for the programming of convector operation from 1 to 60 minutes. Indicator set to OFF: the convection heater stops operating. Use of the timer function (from 0 to 60 minutes): turn the timer dial clockwise and set the number of minutes for which you wish the appliance to function. Indicator set to ON: the convection heater functions continuously.